Bike Wall Mount, SUPER HANDY! – Methods Collector
License

Picture of  Bike Wall Mount, SUPER HANDY!

I needed a bike rack and came up with this. This was a fun project and it works really well. I use it consistently. The Process of figuring out how to make the hands was great and would consider making some coat hangers that are similar.

If you like my work, feel free to check out my Weekly projects over on the ol’ youtube 🙂 https://www.youtube.com/channel/UCDMP90ZnFgjhxnzWYrF4Yvg/videos?view_as=subscriber

Step 1: Tools Needed.

Band saw

Hand saw

Sand paper (Bench top sander is easier for some parts, but not necessary)

Table saw

Dowels x 12

Glue

Finish

Paint

2 Keyhole hangers

Pocket hole jig, or something to make sure the dowels are going in straight

Step 2: Starting With the Hands

Picture of Starting With the Hands Picture of Starting With the Hands Picture of Starting With the Hands

I used two chunks of wood for the hands

Wood size: 3.5″ x 3.5″ X 5.5′

-After drawing out the shape, cut the spaces between the fingers at about 5-6mm each on the bandsaw

Step 3:

Picture of Picture of Picture of Picture of Picture of

-Cut out the side profile of the hand, make sure to measure your bike and make the area that holds the frame 1/8″ – 1/4″ bigger then the top bar of the bike frame.

-The second step I missed in the video and it involves cutting away the rest of the palm besides the thumb, you can do this with a hand saw

Step 4: Finishing

Picture of Finishing Picture of Finishing Picture of Finishing Picture of Finishing Picture of Finishing

Basically sand everything down to 220 grit and use whatever finish you like. I used a Poly Finish

-use a thin piece of wood wrapped in sand paper to smooth out between the fingers.

-use a rounded piece of wood to sand between the thumb and the fingers

Step 5: The Wall Mount

Picture of The Wall Mount Picture of The Wall Mount

The wall mount is made with wood that I had laying around.

Back panel: 9″ x 9″

Horizontal piece: 6″ x 11.5″ Its important to make sure the bike is far enough away from the wall so the pedals don’t hit the wall. The 6″ plus the depth of the hand made the bike sit 8″ off the wall.

I used a pocket hole jig by milescraft to get the dowel holes in the right place.

**If I were to do this again I would have made the back panel a at least a bit thicker.

Step 6: Mounting the Hands

Picture of Mounting the Hands Picture of Mounting the Hands Picture of Mounting the Hands

Mount the hands using the pocket hole jig and dowels.

Do some extra measurements here because the last thing you want is for the hands to be a little off.

Step 7: Hanging

Picture of Hanging

I wanted the mount to lay flush against the wall so I embed two Keyhole Hangers, one on the top and one on the bottom.

Step 8: Finished

Picture of FinishedPicture of FinishedPicture of Finished

I added a little support, just for some security.

And we’re done!

Step 9:

Created by Johnny Wikk | License

Leave your vote

50 points
Upvote Downvote

Comments

0 comments

Internet is huge! Help us find great content

About

Methods collector

Log In

Forgot password?

Don't have an account? Register

Forgot password?

Enter your account data and we will send you a link to reset your password.

Your password reset link appears to be invalid or expired.

Log in

Privacy Policy