Pallet Woodstore

Pallet Woodstore

Pallet Woodstore

We had loads of wood being stored in our outhouse, it’s a little bit damp in there and some of the wood was starting to go mouldy.
In the shops, a wood store this size was between £200 and £275. This one cost me bout £10 for the ply, £5 for the stain, and I had to buy a crowbar, again for about £5. The pallets were free and I already had screws, nails etc from building my blanket box.

After seeing loads of pallet instructables, I thought I would give a woodstore a go.

First job was to acquire some pallets. I had access to some from work, but could only fit a few in my car at a time. Therefore I took pallets apart as I got them. Taking them apart was much easier than I anticipated, but obviously lost a few panels as I went along.

Step 1: The Base

The first couple of pallets I cut down to the width of the space I was using, to use as the base. I am using to pallet lengths (1 is slightly longer than the other). The area I am using is on a slope so I also added some supports underneath so the whole thing would be level.

I decided that it would be easiest to build this as two sections, and join them together.

I stained the base using Ronseal.

Final Result:

Make Another One

Leave your vote

50 points
Upvote Downvote
ArrowCollected by Woodspots
Please to comment



Log In

Or with username:

Forgot password?

Don't have an account? Register

Forgot password?

Enter your account data and we will send you a link to reset your password.

Your password reset link appears to be invalid or expired.

Log in

Privacy Policy

Add to Collection

No Collections

Here you'll find all collections you've created before.

Post Navigator Engineered By WordPress Navigator Plugin