{"id":39808,"date":"2026-01-15T13:39:18","date_gmt":"2026-01-15T18:39:18","guid":{"rendered":"https:\/\/www.method.me\/?p=39808"},"modified":"2026-05-20T16:31:31","modified_gmt":"2026-05-20T20:31:31","slug":"lean-manufacturing-principles","status":"publish","type":"post","link":"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/","title":{"rendered":"Lean manufacturing principles: A complete guide to waste reduction (2026)"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Waste in manufacturing is not always obvious: it hides in excess inventory, idle time, unnecessary motion, and defects that surface too late. Lean <a href=\"https:\/\/www.method.me\/industries\/manufacturing-crm-software\/\">manufacturing<\/a> principles give teams a structured framework to find and eliminate these inefficiencies while protecting product quality. This guide covers the five core lean principles, the tools used to apply them, and a practical approach to getting started.<\/p>\n\n\n\n<div style=\"background-color: #f0f5ff; border-left: 4px solid #0057ff; border-radius: 8px; padding: 1.2em 1.5em; margin: 1.5em 0;\">\n  <p style=\"margin: 0 0 0.6em; font-weight: 700; color: #0057ff; font-size: 0.8em; text-transform: uppercase; letter-spacing: 0.08em;\">TL;DR<\/p>\n  <ul style=\"margin: 0; padding-left: 1.2em; line-height: 1.7;\">\n    <li>Lean manufacturing focuses on eliminating waste to deliver more value with fewer resources.<\/li>\n    <li>The five lean principles are define value, map the value stream, create flow, establish pull, and improve continuously.<\/li>\n    <li>Tools like 5S, Kanban, and SMED help manufacturers reduce waste and standardize workflows.<\/li>\n    <li>Pull-based production systems prevent overproduction by aligning output with actual customer demand.<\/li>\n    <li>Digital tools that automate workflows and eliminate manual data entry directly support lean manufacturing principles.<\/li>\n  <\/ul>\n<\/div>\n\n\n\n<div class=\"wp-block-group m-section-thin m-bluebanner is-layout-flow wp-block-group-is-layout-flow\"><div class=\"wp-block-group__inner-container\">\n<h3 class=\"wp-block-heading has-text-align-center simpletoc-hidden\" id=\"h-it-s-time-to-maximize-your-manufacturing-efficiency\">It&#8217;s time to maximize your manufacturing efficiency.<\/h3>\n\n\n\n<div class=\"wp-block-buttons m-justified-center is-content-justification-center is-layout-flex wp-container-core-buttons-is-layout-3e41869c wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button m-button cta-content crm-cta3\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/signup.method.me\/methodcrm\/\">Try Method for free<\/a><\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<p class=\"has-text-align-center wp-block-paragraph\"><a href=\"https:\/\/methodcrm.youcanbook.me\/\">Have questions? Talk to our team. <\/a><\/p>\n\n\n<h2 class=\"simpletoc-title\">Table of Contents<\/h2>\n<ul class=\"simpletoc-list\">\n\n<li><a href=\"#h-what-is-lean-manufacturing\">What is lean manufacturing? \ud83e\udd14<\/a>\n\n<\/li>\n<li><a href=\"#h-the-five-core-lean-manufacturing-principles\">The five core lean manufacturing principles \ud83c\udfed<\/a>\n\n\n<ul><li>\n<a href=\"#define-value\">Define value<\/a>\n\n<\/li>\n<li><a href=\"#map-the-value-stream\">Map the value stream<\/a>\n\n<\/li>\n<li><a href=\"#establish-a-pull-system\">Establish a pull system<\/a>\n\n<\/li>\n<li><a href=\"#pursue-perfection\">Pursue perfection<\/a>\n\n<\/li>\n\n<\/li>\n<\/ul>\n<li><a href=\"#h-lean-manufacturing-tools-and-techniques\">Lean manufacturing tools and techniques \ud83d\udee0\ufe0f<\/a>\n\n<\/li>\n<li><a href=\"#h-typical-inefficiencies-that-lean-addresses\">Typical inefficiencies that lean addresses \u26a0\ufe0f<\/a>\n\n\n<li><a href=\"#h-how-to-implement-lean-manufacturing\">How to implement lean manufacturing \ud83d\udca1<\/a>\n\n\n<ul><li>\n<a href=\"#1-baseline\">1. Baseline<\/a>\n\n<\/li>\n<li><a href=\"#2-stabilize\">2. Stabilize<\/a>\n\n<\/li>\n<li><a href=\"#3-create-flow\">3. Create flow<\/a>\n\n<\/li>\n<li><a href=\"#4-establish-pull\">4. Establish pull<\/a>\n\n<\/li>\n<li><a href=\"#5-sustain-and-improve\">5. Sustain and improve<\/a>\n\n<\/li>\n<\/ul>\n<li><a href=\"#h-lean-principles-in-today-s-manufacturing-environment\">Lean principles in today\u2019s manufacturing environment \ud83d\udc68\u200d\ud83c\udfed<\/a>\n\n\n<li><a href=\"#h-lean-manufacturing-vs-other-improvement-methodologies\">Lean manufacturing vs other improvement methodologies \u2696\ufe0f<\/a>\n\n<\/li>\n<li><a href=\"#h-conclusion\">Conclusion \ud83d\udcac<\/a>\n\n<\/li>\n<li><a href=\"#h-frequently-asked-questions\">Frequently asked questions<\/a>\n<\/li><\/ul>\n\n\n<h2 class=\"wp-block-heading\" id=\"h-what-is-lean-manufacturing\"><strong>What is lean manufacturing?<\/strong> \ud83e\udd14<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Lean manufacturing is a production methodology that focuses on robust efficiency by maximizing value while minimizing waste during the production process.&nbsp; \u201cValue\u201d is defined by what the customer needs and is willing to pay for. \u201cWaste\u201d is everything else that consumes time, materials, labor, or capacity without improving the product outcome.&nbsp; Lean manufacturing improves speed and cost by redesigning how work flows and removing anything that gets in the way.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Lean production has its roots in Japanese manufacturing and the Toyota Production System (TPS).&nbsp; Below are some of the outcomes of lean manufacturing and why they matter for small and medium-sized manufacturers.<\/p>\n\n\n\n<table class=\"table table-minimal-border\">\n<thead>\n<tr>\n<th>Lean outcome<\/th>\n<th>What improves<\/th>\n<th>Why it matters for SMBs<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Shorter lead times<\/strong><\/td>\n<td>Less waiting for raw materials and batching<\/td>\n<td>Improves delivery promises and customer trust<\/td>\n<\/tr>\n<tr>\n<td><strong>Lower costs<\/strong><\/td>\n<td>Less scrap, rework, and excess inventory<\/td>\n<td>Protects margins without raising prices<\/td>\n<\/tr>\n<tr>\n<td><strong>Better quality<\/strong><\/td>\n<td>Faster detection of issues<\/td>\n<td>Reduces returns, warranty work, and expediting<\/td>\n<\/tr>\n<tr>\n<td><strong>Higher throughput<\/strong><\/td>\n<td>Constraints become visible<\/td>\n<td>Increases capacity without adding headcount first<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-the-five-core-lean-manufacturing-principles\"><strong>The five core lean manufacturing principles<\/strong> \ud83c\udfed<\/h2>\n\n\n\n<h3 id=\"define-value\" class=\"wp-block-heading\"><strong>Define value<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Before establishing how to achieve maximum value with the least inputs, it&#8217;s important to define what we mean by value. Value is predominantly defined by the market; it\u2019s all about how customers perceive your product and what\u2019s important to them. Fit, function, spec compliance, delivery timing, documentation, and service expectations can all be important to how customers &#8220;value&#8221; your product. Lean starts by clarifying how your customers perceive value and what exactly it means to them. For example, a customer buying cosmetics might not care as much about the production as they do about delivery and documentation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Once the value is defined, lean principles sort them into three buckets, and these three buckets will define what you do with processes. The three buckets are:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li class=\"\"><strong>Value-added work<\/strong> \u2013 Changes the part or assembly toward customer requirements.<br><em>Lean decision:<\/em> Protect it and make it flow.<\/li>\n\n\n\n<li class=\"\"><strong>Necessary but non-value work<\/strong> \u2013 Required due to current constraints (for example, certain inspections).<br><em>Lean decision:<\/em> Reduce it over time through better process control.<\/li>\n\n\n\n<li class=\"\"><strong>Pure waste<\/strong> \u2013 Consumes time or materials without improving the product outcome.<br><em>Lean decision:<\/em> Eliminate first.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">The table below shows an example breakdown of labor time across value-added work, necessary but non-value-added activities, and pure waste. With this snapshot, you can immediately see what might be affected by lean principles. The 20 hours of pure waste will be the first to go.<\/p>\n\n\n\n<table class=\"table table-minimal-border\">\n<thead>\n<tr>\n<th>Category<\/th>\n<th>Share of weekly labor time (%)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><em><strong>Value-added<\/strong><\/em><\/td>\n<td>52<\/td>\n<\/tr>\n<tr>\n<td><em><strong>Necessary but non-value<\/strong><\/em><\/td>\n<td>28<\/td>\n<\/tr>\n<tr>\n<td><em><strong>Pure waste<\/strong><\/em><\/td>\n<td>20<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n<h3 id=\"map-the-value-stream\" class=\"wp-block-heading\"><strong>Map the value stream<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Value stream mapping shows how work actually moves from order to shipment, not how you think it moves, or what someone told you. This is important because it gives you insight into the <em>real data. <\/em>For SMBs, this is where hidden lead time appears: jobs sitting in queues, waiting for inspection, waiting for materials, waiting for a shared machine, waiting for a sign-off, or<a href=\"https:\/\/www.method.me\/crm-quickbooks\/invoice-software\/\"> invoicing<\/a>. Mapping helps you see the constraints and blockages and then optimize accordingly.<\/p>\n\n\n\n<script>!function(e,n,i,s){var d=\"InfogramEmbeds\";var o=e.getElementsByTagName(n)[0];if(window[d]&&window[d].initialized)window[d].process&&window[d].process();else if(!e.getElementById(i)){var r=e.createElement(n);r.async=1,r.id=i,r.src=s,o.parentNode.insertBefore(r,o)}}(document,\"script\",\"infogram-async\",\"https:\/\/e.infogram.com\/js\/dist\/embed-loader-min.js\");<\/script>\n<table class=\"table table-minimal-border\">\n<thead>\n<tr>\n<th>Step<\/th>\n<th>Cycle time<\/th>\n<th>Average wait time<\/th>\n<th>Common waste revealed<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Material prep<\/strong><\/td>\n<td>20 min<\/td>\n<td>1 day<\/td>\n<td>Waiting, transportation<\/td>\n<\/tr>\n<tr>\n<td><strong>Machining<\/strong><\/td>\n<td>14 min<\/td>\n<td>2 days<\/td>\n<td>Queue before constraint<\/td>\n<\/tr>\n<tr>\n<td><strong>Inspection<\/strong><\/td>\n<td>6 min<\/td>\n<td>1 day<\/td>\n<td>Batching, rework loop<\/td>\n<\/tr>\n<tr>\n<td><strong>Assembly &amp; pack<\/strong><\/td>\n<td>18 min<\/td>\n<td>1 day<\/td>\n<td>Missing parts, re-handling<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<!-- Chart opportunity: Stacked bar showing cycle time vs wait time -->\n<h3>Create flow<\/h3>\nFlow means work moves through production with minimal stops. Small and medium-sized manufacturers are faced with a break in flow when differnet variables such as setup time and routing changes are unclear or incorrect.   Improving flow usually starts with a simple question: \u201cWhere does work pile up?\u201d That pile is your constraint.\n<div style=\"display: grid; grid-template-columns: repeat(3, 1fr); gap: 1em; margin-top: 1.5em;\">\n<div style=\"border: 1px solid #e0e0e0; padding: 1em; border-radius: 8px;\"><strong>Batching<\/strong>\n<em>Work piles up between steps.<\/em>\n<ul style=\"margin: 0.75em 0 0; padding-left: 1.1em;\">\n \t<li>Long queues and waiting<\/li>\n \t<li>High WIP hides defects<\/li>\n \t<li>Slow feedback on issues<\/li>\n<\/ul>\n<\/div>\n<div style=\"border: 1px solid #e0e0e0; padding: 1em; border-radius: 8px;\"><strong>Balanced production<\/strong>\n<em>Workloads match capacity.<\/em>\n<ul style=\"margin: 0.75em 0 0; padding-left: 1.1em;\">\n \t<li>Fewer bottlenecks<\/li>\n \t<li>More predictable schedules<\/li>\n \t<li>Less expediting<\/li>\n<\/ul>\n<\/div>\n<div style=\"border: 1px solid #e0e0e0; padding: 1em; border-radius: 8px;\"><strong>Continuous flow<\/strong>\n<em>Minimal waiting and handoffs.<\/em>\n<ul style=\"margin: 0.75em 0 0; padding-left: 1.1em;\">\n \t<li>Shorter lead times<\/li>\n \t<li>Faster defect detection<\/li>\n \t<li>Better on-time delivery<\/li>\n<\/ul>\n<\/div>\n<\/div>\n<div style=\"border-left: 4px solid #2315A5; padding-left: 1em; margin: 2em 0; font-size: 1rem;\"><strong>Pro tip:<\/strong> If your schedule changes daily, it\u2019s usually a flow problem, not a planning problem. <\/div>\n\n\n\n<h3 id=\"establish-a-pull-system\" class=\"wp-block-heading\"><strong>Establish a pull system<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">A pull system means work only starts when there is a real need for it, not just because people or machines are available. Instead of building ahead \u201cjust in case,\u201d production waits for a clear signal that the next step or the customer actually needs the part.&nbsp; In plain terms, this keeps inventory from piling up and exposes problems faster. For example, rather than producing 500 units to stay busy, a shop might only build more once the previous batch is used, which keeps priorities clear and reduces rework, waiting, and last-minute firefighting. It&#8217;s one of the features that Toyota&#8217;s &#8220;Just in Time JIT&#8221; ultra-lean manufacturing ideology is centered around. This works well most of the time, but when there are interruptions in one part of the supply chain, the lack of inventory and head start can be detrimental.<\/p>\n\n\n\n&nbsp;\n<table class=\"table table-minimal-border\">\n<thead>\n<tr>\n<th>Push production<\/th>\n<th>Pull production<\/th>\n<th>What changes operationally<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Start work to stay busy<\/td>\n<td>Start work based on the demand signal<\/td>\n<td>Less WIP, clearer priorities<\/td>\n<\/tr>\n<tr>\n<td>Inventory used as a buffer<\/td>\n<td>Flow is used as a buffer<\/td>\n<td>Problems surface sooner<\/td>\n<\/tr>\n<tr>\n<td>Defects discovered late<\/td>\n<td>Defects discovered earlier<\/td>\n<td>Lower rework and expediting<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n<h3 id=\"pursue-perfection\" class=\"wp-block-heading\"><strong>Pursue perfection<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The pursuit of perfection doesn&#8217;t mean everything has to be perfect because this is rare. Instead, it&#8217;s about streamlining workflows and <a href=\"https:\/\/www.method.me\/blog\/continuous-improvement-in-manufacturing\/\">continuous improvement<\/a> (Kaizen). Measuring performance, running targeted changes, verifying results, and standardizing what works. That doesn&#8217;t sound so complicated, but in the pursuit of perfection, steps cannot be missed.<\/p>\n\n\n\n<div class=\"wp-block-group m-section-thin m-bluebanner is-layout-flow wp-block-group-is-layout-flow\"><div class=\"wp-block-group__inner-container\">\n<h3 class=\"wp-block-heading has-text-align-center simpletoc-hidden\" id=\"h-it-s-time-to-maximize-your-manufacturing-efficiency\">It&#8217;s time to maximize your manufacturing efficiency.<\/h3>\n\n\n\n<div class=\"wp-block-buttons m-justified-center is-content-justification-center is-layout-flex wp-container-core-buttons-is-layout-3e41869c wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button m-button cta-content crm-cta3\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/signup.method.me\/methodcrm\/\">Try Method for free<\/a><\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-lean-manufacturing-tools-and-techniques\"><strong>Lean manufacturing tools and techniques<\/strong> \ud83d\udee0\ufe0f<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">There are tools and techniques that companies use to achieve lean manufacturing targets some of which are as follows:<\/p>\n\n\n\n<table class=\"table table-minimal-border\">\n<thead>\n<tr>\n<th>Tool<\/th>\n<th>What it does<\/th>\n<th>Best use case in SMBs<\/th>\n<th>Metric to track<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>5S<\/strong><\/td>\n<td>Organizes work areas to reduce motion and errors<\/td>\n<td>High-mix shops where tools\/materials are frequently searched<\/td>\n<td>Time-to-find \/ setup time<\/td>\n<\/tr>\n<tr>\n<td><strong>Kanban<\/strong><\/td>\n<td>Visual signals for pull replenishment<\/td>\n<td>Stable consumption components or WIP limits at constraint<\/td>\n<td>WIP levels \/ stockouts<\/td>\n<\/tr>\n<tr>\n<td><strong>SMED<\/strong><\/td>\n<td>Reduces changeover time<\/td>\n<td>Shared machines with frequent setups<\/td>\n<td>Setup time trend<\/td>\n<\/tr>\n<tr>\n<td><strong>Standard work<\/strong><\/td>\n<td>Defines the best-known method for a task<\/td>\n<td>Repeatable operations where variation drives defects<\/td>\n<td>First pass yield<\/td>\n<\/tr>\n<tr>\n<td><strong>Takt time<\/strong><\/td>\n<td>Aligns production pace to demand<\/td>\n<td>Lines\/cells where flow is the priority<\/td>\n<td>Throughput vs demand<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n<p class=\"wp-block-paragraph\">The chart below shows an example of how 5S audit scores can improve over time across different areas of a facility. While the scores shown are not tied to a specific operation, this type of trend view helps teams see whether workplace organization efforts are working or if there needs to be some type of overhaul.<\/p>\n\n\n\n<div class=\"infogram-embed\" data-id=\"_\/7rtejAEq3zBpGJzZdz4F\" data-type=\"interactive\" data-title=\"Method - lean manufacturing principles - \"><\/div>\n<script>!function(e,n,i,s){var d=\"InfogramEmbeds\";var o=e.getElementsByTagName(n)[0];if(window[d]&&window[d].initialized)window[d].process&&window[d].process();else if(!e.getElementById(i)){var r=e.createElement(n);r.async=1,r.id=i,r.src=s,o.parentNode.insertBefore(r,o)}}(document,\"script\",\"infogram-async\",\"https:\/\/e.infogram.com\/js\/dist\/embed-loader-min.js\");<\/script>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-typical-inefficiencies-that-lean-addresses\"><strong>Typical inefficiencies that lean addresses<\/strong> \u26a0\ufe0f<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Lean targets the most common sources of operational drag (often called Muda). The point isn\u2019t to label waste for the sake of it, it\u2019s to identify what\u2019s consuming capacity and cash, then remove it systematically. Here are some common examples almost everyone in the manufacturing world will have experienced at one point or another.<\/p>\n\n\n\n<table class=\"table table-minimal-border\">\n<thead>\n<tr>\n<th>Waste type<\/th>\n<th>What it looks like<\/th>\n<th>Root cause to investigate<\/th>\n<th>Lean countermeasure<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Overproduction<\/strong><\/td>\n<td>Building ahead of demand \u201cjust in case.\u201d<\/td>\n<td>Forecast uncertainty, long setups<\/td>\n<td>Pull, Single-Minute Exchange of Die (SMED), WIP limits<\/td>\n<\/tr>\n<tr>\n<td><strong>Waiting<\/strong><\/td>\n<td>Jobs queued between steps<\/td>\n<td>Constraint imbalance, approvals<\/td>\n<td>Flow, standard work, routing clarity<\/td>\n<\/tr>\n<tr>\n<td><strong>Transportation<\/strong><\/td>\n<td>Excess movement of parts\/materials<\/td>\n<td>Layout, batching, unclear staging<\/td>\n<td>Cell design, point-of-use storage<\/td>\n<\/tr>\n<tr>\n<td><strong>Defects<\/strong><\/td>\n<td>Rework, scrap, returns<\/td>\n<td>Variation, training gaps, unstable process<\/td>\n<td>Standard work, process control, faster feedback<\/td>\n<\/tr>\n<tr>\n<td><strong>Over-processing<\/strong><\/td>\n<td>Doing more than spec requires<\/td>\n<td>Unclear requirements, \u201cwe always do it this way.\u201d<\/td>\n<td>Define value, revise standards<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n<div class=\"wp-block-group m-section-thin m-bluebanner is-layout-flow wp-block-group-is-layout-flow\"><div class=\"wp-block-group__inner-container\">\n<h3 class=\"wp-block-heading has-text-align-center simpletoc-hidden\" id=\"h-it-s-time-to-maximize-your-manufacturing-efficiency\">It&#8217;s time to maximize your manufacturing efficiency.<\/h3>\n\n\n\n<div class=\"wp-block-buttons m-justified-center is-content-justification-center is-layout-flex wp-container-core-buttons-is-layout-3e41869c wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button m-button cta-content crm-cta3\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/signup.method.me\/methodcrm\/\">Try Method for free<\/a><\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-how-to-implement-lean-manufacturing\"><strong>How to implement lean manufacturing<\/strong> \ud83d\udca1<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Lean works best as a staged transformation: start small, measure clearly, standardize what works, and then expand. The fastest wins usually come from improving flow at the constraint and reducing WIP. The most sustainable wins come from standard work, consistent measurement, and leadership routines that keep improvements alive.<\/p>\n\n\n\n<h3 id=\"1-baseline\" class=\"wp-block-heading\"><strong>1. Baseline<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Start by mapping the value stream and identifying the primary constraint. Set clear, measurable targets so everyone is aligned on what \u201cbetter\u201d looks like.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li class=\"\"><strong>What you do:<\/strong> Map the value stream, identify the constraint, and set initial targets<\/li>\n\n\n\n<li class=\"\"><strong>What you measure:<\/strong> Lead time, WIP, first pass yield<\/li>\n\n\n\n<li class=\"\"><strong>What success looks like:<\/strong> One shared source of truth for current performance<\/li>\n<\/ul>\n\n\n\n<h3 id=\"2-stabilize\" class=\"wp-block-heading\"><strong>2. Stabilize<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Before pushing for speed, reduce variation. Stabilizing the process makes problems visible and prevents improvements from collapsing under daily noise.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li class=\"\"><strong>What you do:<\/strong> Introduce standard work, apply 5S, reduce setup time where needed<\/li>\n\n\n\n<li class=\"\"><strong>What you measure:<\/strong> Setup time, defect rates, downtime<\/li>\n\n\n\n<li class=\"\"><strong>What success looks like:<\/strong> Less variation and fewer operational surprises<\/li>\n<\/ul>\n\n\n\n<h3 id=\"3-create-flow\" class=\"wp-block-heading\"><strong>3. Create flow<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">With a stable baseline, focus on flow. Reduce batching and clarify routing so work moves forward instead of piling up.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li class=\"\"><strong>What you do:<\/strong> Balance work, reduce batching, improve routing clarity<\/li>\n\n\n\n<li class=\"\"><strong>What you measure:<\/strong> Queue time, throughput<\/li>\n\n\n\n<li class=\"\"><strong>What success looks like:<\/strong> Work moves without constant expediting<\/li>\n<\/ul>\n\n\n\n<h3 id=\"4-establish-pull\" class=\"wp-block-heading\"><strong>4. Establish pull<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Pull systems align production with real demand. WIP limits and kanban signals help control inventory and surface problems early.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li class=\"\"><strong>What you do:<\/strong> Introduce kanban system, set WIP limits, define replenishment triggers<\/li>\n\n\n\n<li class=\"\"><strong>What you measure:<\/strong> WIP levels, stockouts, lead time<\/li>\n\n\n\n<li class=\"\"><strong>What success looks like:<\/strong> Lower inventory and faster feedback loops<\/li>\n<\/ul>\n\n\n\n<h3 id=\"5-sustain-and-improve\" class=\"wp-block-heading\"><strong>5. Sustain and improve<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Lean only sticks when improvement becomes routine. Regular reviews and simple scorecards keep momentum from fading.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li class=\"\"><strong>What you do:<\/strong> Run daily and weekly routines, review trends,a kaizen cadence<\/li>\n\n\n\n<li class=\"\"><strong>What you measure:<\/strong> Trend lines by area or process<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>What success looks like:<\/strong> Improvements compound instead of fading over time<\/p>\n\n\n\n<div style=\"border-left: 4px solid #46DF90; padding-left: 1em; margin: 2em 0; font-size: 1rem;\"><strong>Common challenge:<\/strong> Lean fails when improvements are \u201cextra work.\u201d It succeeds when improvements become part of the workflow and reporting.<\/div>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-lean-principles-in-today-s-manufacturing-environment\"><strong>Lean principles in today\u2019s manufacturing environment<\/strong> \ud83d\udc68\u200d\ud83c\udfed<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Lean is more sustainable when supported by real-time visibility and automation. This helps avoid easy fixes down the line, like excess inventory when dealing with inventory management. Digital workflows reduce manual tracking, make deviations visible faster, and keep improvement work connected to operational reality.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/www.method.me\/\">Method CRM<\/a> connects lean workflows (task routing, approvals, exceptions) to the systems manufacturers already rely on, especially QuickBooks, so you can measure and sustain improvement-related data alongside financial and operational records. When your workflows and your data stay connected, lean isn\u2019t a one-off initiative; it becomes the way work runs.<\/p>\n\n\n\n<div class=\"wp-block-group m-section-thin m-bluebanner is-layout-flow wp-block-group-is-layout-flow\"><div class=\"wp-block-group__inner-container\">\n<h3 class=\"wp-block-heading has-text-align-center simpletoc-hidden\" id=\"h-it-s-time-to-maximize-your-manufacturing-efficiency\">It&#8217;s time to maximize your manufacturing efficiency.<\/h3>\n\n\n\n<div class=\"wp-block-buttons m-justified-center is-content-justification-center is-layout-flex wp-container-core-buttons-is-layout-3e41869c wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button m-button cta-content crm-cta3\"><a class=\"wp-block-button__link wp-element-button\" href=\"https:\/\/signup.method.me\/methodcrm\/\">Try Method for free<\/a><\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-lean-manufacturing-vs-other-improvement-methodologies\"><strong>Lean manufacturing vs other improvement methodologies<\/strong> \u2696\ufe0f<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Lean is often paired with other methodologies. The main difference is focus: Lean targets flow and waste; Six Sigma targets variation and defects. Many SMBs use a blended approach over time, starting with lean to stabilize flow, then applying Six Sigma tools to reduce variation where quality is super important.<\/p>\n\n\n\n<table class=\"table table-minimal-border\">\n<thead>\n<tr>\n<th>Approach<\/th>\n<th>Primary focus<\/th>\n<th>Best fit<\/th>\n<th>Typical output<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Lean<\/strong><\/td>\n<td>Waste reduction and flow<\/td>\n<td>Lead time, WIP, throughput challenges<\/td>\n<td>Faster delivery, lower inventory<\/td>\n<\/tr>\n<tr>\n<td><strong>Six Sigma<\/strong><\/td>\n<td>Variation reduction<\/td>\n<td>Defect drivers, process stability issues<\/td>\n<td>Higher yield, lower defects<\/td>\n<\/tr>\n<tr>\n<td><strong>Lean Six Sigma<\/strong><\/td>\n<td>Flow + variation<\/td>\n<td>End-to-end improvement maturity<\/td>\n<td>Efficiency + quality improvements together<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-conclusion\"><strong>Conclusion<\/strong> \ud83d\udcac<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Lean manufacturing principles help SMBs reduce waste, improve flow, cut lead times, and deliver more consistently. The most effective lean programs are practical and measurable: they target the constraint, limit WIP, standardize work, and build routines that sustain gains. When lean is operationalized inside daily workflows, instead of living in disconnected documents, improvements compound and performance stabilizes.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If your lean initiatives still rely on spreadsheets, emails, or manual updates, Method helps bring them into the systems your team already uses\u2014connecting operations directly to QuickBooks for better control, visibility, and follow-through. <a href=\"https:\/\/signup.method.me\/methodcrm\/\">Try Method for free<\/a> today. <\/p>\n\n\n\n<h2 class=\"wp-block-heading has-text-align-center\" id=\"h-frequently-asked-questions\">Frequently asked questions <\/h2>\n\n\n\n<section  class=\"block block--bgdefaultcolor block--paddingTopDefault block--paddingBottomDefault block--textdefault block--alignDefault   block--faqs\" \">\n    \n  <div class=\"container container--default\">\n    \n          <div class=\"faqs\">\n                  <div class=\"faq\">\n            <h2 class=\"faq-question\" tabindex=\"0\" aria-label=\"FAQ question. Click to reveal answer.\">\n              What is Lean Six Sigma?            <\/h2>\n\n            <div class=\"faq-answer contentStyled\">\n                            <p>Lean Six Sigma combines lean\u2019s waste reduction with Six Sigma\u2019s data-driven approach to reducing variation and defects. Many manufacturers use lean to improve flow first, then apply Six Sigma tools to stabilize critical processes.<\/p>\n            <\/div>\n\n            <div class=\"faq-toggle\"><\/div>\n          <\/div>\n                  <div class=\"faq\">\n            <h2 class=\"faq-question\" tabindex=\"0\" aria-label=\"FAQ question. Click to reveal answer.\">\n              How do the principles of lean manufacturing apply to small and mid-sized manufacturers?            <\/h2>\n\n            <div class=\"faq-answer contentStyled\">\n                            <p>The principles of lean manufacturing help SMBs focus their efforts on delivering true customer value by removing waste, simplifying workflows, and improving visibility. When applied consistently, they make manufacturing operations more predictable, reduce lead times, and free up capacity without requiring major capital investment.<\/p>\n            <\/div>\n\n            <div class=\"faq-toggle\"><\/div>\n          <\/div>\n                  <div class=\"faq\">\n            <h2 class=\"faq-question\" tabindex=\"0\" aria-label=\"FAQ question. Click to reveal answer.\">\n              How does lean thinking help manufacturers adapt to changing markets?            <\/h2>\n\n            <div class=\"faq-answer contentStyled\">\n                            <p>Lean thinking encourages teams to align production closely with customer demand, making it easier to adjust priorities and avoid excess inventory. By responding faster to real needs and surfacing problems earlier, manufacturers can improve reliability and ultimately increase customer satisfaction.<\/p>\n            <\/div>\n\n            <div class=\"faq-toggle\"><\/div>\n          <\/div>\n              <\/div>\n    \n    \n          <script type=\"application\/ld+json\">\n        {\n          \"@context\": \"https:\/\/schema.org\",\n          \"@type\": \"FAQPage\",\n          \"@id\": \"\/faq#1\",\n          \"mainEntity\": [\n                                        {\n                \"@type\": \"Question\",\n                \"name\": \"What is Lean Six Sigma?\",\n                \"acceptedAnswer\": {\n                  \"@type\": \"Answer\",\n                  \"text\": \"<p>Lean Six Sigma combines lean\u2019s waste reduction with Six Sigma\u2019s data-driven approach to reducing variation and defects. Many manufacturers use lean to improve flow first, then apply Six Sigma tools to stabilize critical processes.<\/p>\n\"\n                }\n              }\n              ,                                         {\n                \"@type\": \"Question\",\n                \"name\": \"How do the principles of lean manufacturing apply to small and mid-sized manufacturers?\",\n                \"acceptedAnswer\": {\n                  \"@type\": \"Answer\",\n                  \"text\": \"<p>The principles of lean manufacturing help SMBs focus their efforts on delivering true customer value by removing waste, simplifying workflows, and improving visibility. When applied consistently, they make manufacturing operations more predictable, reduce lead times, and free up capacity without requiring major capital investment.<\/p>\n\"\n                }\n              }\n              ,                                         {\n                \"@type\": \"Question\",\n                \"name\": \"How does lean thinking help manufacturers adapt to changing markets?\",\n                \"acceptedAnswer\": {\n                  \"@type\": \"Answer\",\n                  \"text\": \"<p>Lean thinking encourages teams to align production closely with customer demand, making it easier to adjust priorities and avoid excess inventory. By responding faster to real needs and surfacing problems earlier, manufacturers can improve reliability and ultimately increase customer satisfaction.<\/p>\n\"\n                }\n              }\n                                    ]\n        }\n      <\/script>\n    \n    \n  <\/div>\n<\/section>\n\n","protected":false},"excerpt":{"rendered":"<p>Learn lean manufacturing principles and how to apply them to reduce waste, improve production flow, and increase customer satisfaction. <\/p>\n","protected":false},"author":71,"featured_media":39819,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[228],"tags":[],"class_list":["post-39808","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-manufacturing"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v27.5 (Yoast SEO v27.5) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Lean manufacturing principles: A complete guide &#8212; Method<\/title>\n<meta name=\"description\" content=\"Learn lean manufacturing principles and how to apply them to reduce waste, improve production flow, and increase customer satisfaction.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Lean manufacturing principles: A complete guide to waste reduction (2026) &#8212; Method\" \/>\n<meta property=\"og:description\" content=\"Learn lean manufacturing principles and how to apply them to reduce waste, improve production flow, and increase customer satisfaction.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/\" \/>\n<meta property=\"og:site_name\" content=\"Method\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/MethodHQ\" \/>\n<meta property=\"article:published_time\" content=\"2026-01-15T18:39:18+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-05-20T20:31:31+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.method.me\/wp-content\/uploads\/2026\/01\/Lean-Manufacturing-Principles-Method-CRM.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"2400\" \/>\n\t<meta property=\"og:image:height\" content=\"1350\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Benjamin Locke\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@methodcrm\" \/>\n<meta name=\"twitter:site\" content=\"@methodcrm\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Benjamin Locke\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"1 minute\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.method.me\\\/blog\\\/lean-manufacturing-principles\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.method.me\\\/blog\\\/lean-manufacturing-principles\\\/\"},\"author\":{\"name\":\"Benjamin Locke\",\"@id\":\"https:\\\/\\\/www.method.me\\\/#\\\/schema\\\/person\\\/db8d433458169c561651f0ce238f4daa\"},\"headline\":\"Lean manufacturing principles: A complete guide to waste reduction (2026)\",\"datePublished\":\"2026-01-15T18:39:18+00:00\",\"dateModified\":\"2026-05-20T20:31:31+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.method.me\\\/blog\\\/lean-manufacturing-principles\\\/\"},\"wordCount\":2016,\"publisher\":{\"@id\":\"https:\\\/\\\/www.method.me\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.method.me\\\/blog\\\/lean-manufacturing-principles\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.method.me\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/Lean-Manufacturing-Principles-Method-CRM.jpg\",\"articleSection\":[\"Manufacturing\"],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.method.me\\\/blog\\\/lean-manufacturing-principles\\\/\",\"url\":\"https:\\\/\\\/www.method.me\\\/blog\\\/lean-manufacturing-principles\\\/\",\"name\":\"Lean manufacturing principles: A complete guide &#8212; Method\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.method.me\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.method.me\\\/blog\\\/lean-manufacturing-principles\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.method.me\\\/blog\\\/lean-manufacturing-principles\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.method.me\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/Lean-Manufacturing-Principles-Method-CRM.jpg\",\"datePublished\":\"2026-01-15T18:39:18+00:00\",\"dateModified\":\"2026-05-20T20:31:31+00:00\",\"description\":\"Learn lean manufacturing principles and how to apply them to reduce waste, improve production flow, and increase customer satisfaction.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.method.me\\\/blog\\\/lean-manufacturing-principles\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.method.me\\\/blog\\\/lean-manufacturing-principles\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.method.me\\\/blog\\\/lean-manufacturing-principles\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.method.me\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/Lean-Manufacturing-Principles-Method-CRM.jpg\",\"contentUrl\":\"https:\\\/\\\/www.method.me\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/Lean-Manufacturing-Principles-Method-CRM.jpg\",\"width\":2400,\"height\":1350,\"caption\":\"ean Manufacturing Principles Method CRM\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.method.me\\\/blog\\\/lean-manufacturing-principles\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.method.me\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Lean manufacturing principles: A complete guide to waste reduction (2026)\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.method.me\\\/#website\",\"url\":\"https:\\\/\\\/www.method.me\\\/\",\"name\":\"Method\",\"description\":\"CRM Software for QuickBooks\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.method.me\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.method.me\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.method.me\\\/#organization\",\"name\":\"Method Integration\",\"url\":\"https:\\\/\\\/www.method.me\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.method.me\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.method.me\\\/wp-content\\\/uploads\\\/2019\\\/04\\\/Logo-MethodCRM-darkblue-V2.svg\",\"contentUrl\":\"https:\\\/\\\/www.method.me\\\/wp-content\\\/uploads\\\/2019\\\/04\\\/Logo-MethodCRM-darkblue-V2.svg\",\"width\":300,\"height\":80,\"caption\":\"Method Integration\"},\"image\":{\"@id\":\"https:\\\/\\\/www.method.me\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/MethodHQ\",\"https:\\\/\\\/x.com\\\/methodcrm\",\"https:\\\/\\\/linkedin.com\\\/company\\\/method-integration\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.method.me\\\/#\\\/schema\\\/person\\\/db8d433458169c561651f0ce238f4daa\",\"name\":\"Benjamin Locke\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.method.me\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/avatar_user_71_1780425602-96x96.jpeg\",\"url\":\"https:\\\/\\\/www.method.me\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/avatar_user_71_1780425602-96x96.jpeg\",\"contentUrl\":\"https:\\\/\\\/www.method.me\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/avatar_user_71_1780425602-96x96.jpeg\",\"caption\":\"Benjamin Locke\"},\"description\":\"Hailing from Denver, Colorado, Benjamin spent 15 years in Asia involved in real estate and global manufacturing and supply chain with a focus on packaging in Europe. He now focuses on writing finance and business-related content to share some of his experiences with a global audience.\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Lean manufacturing principles: A complete guide &#8212; Method","description":"Learn lean manufacturing principles and how to apply them to reduce waste, improve production flow, and increase customer satisfaction.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/","og_locale":"en_US","og_type":"article","og_title":"Lean manufacturing principles: A complete guide to waste reduction (2026) &#8212; Method","og_description":"Learn lean manufacturing principles and how to apply them to reduce waste, improve production flow, and increase customer satisfaction.","og_url":"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/","og_site_name":"Method","article_publisher":"https:\/\/www.facebook.com\/MethodHQ","article_published_time":"2026-01-15T18:39:18+00:00","article_modified_time":"2026-05-20T20:31:31+00:00","og_image":[{"width":2400,"height":1350,"url":"https:\/\/www.method.me\/wp-content\/uploads\/2026\/01\/Lean-Manufacturing-Principles-Method-CRM.jpg","type":"image\/jpeg"}],"author":"Benjamin Locke","twitter_card":"summary_large_image","twitter_creator":"@methodcrm","twitter_site":"@methodcrm","twitter_misc":{"Written by":"Benjamin Locke","Est. reading time":"1 minute"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/#article","isPartOf":{"@id":"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/"},"author":{"name":"Benjamin Locke","@id":"https:\/\/www.method.me\/#\/schema\/person\/db8d433458169c561651f0ce238f4daa"},"headline":"Lean manufacturing principles: A complete guide to waste reduction (2026)","datePublished":"2026-01-15T18:39:18+00:00","dateModified":"2026-05-20T20:31:31+00:00","mainEntityOfPage":{"@id":"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/"},"wordCount":2016,"publisher":{"@id":"https:\/\/www.method.me\/#organization"},"image":{"@id":"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/#primaryimage"},"thumbnailUrl":"https:\/\/www.method.me\/wp-content\/uploads\/2026\/01\/Lean-Manufacturing-Principles-Method-CRM.jpg","articleSection":["Manufacturing"],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/","url":"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/","name":"Lean manufacturing principles: A complete guide &#8212; Method","isPartOf":{"@id":"https:\/\/www.method.me\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/#primaryimage"},"image":{"@id":"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/#primaryimage"},"thumbnailUrl":"https:\/\/www.method.me\/wp-content\/uploads\/2026\/01\/Lean-Manufacturing-Principles-Method-CRM.jpg","datePublished":"2026-01-15T18:39:18+00:00","dateModified":"2026-05-20T20:31:31+00:00","description":"Learn lean manufacturing principles and how to apply them to reduce waste, improve production flow, and increase customer satisfaction.","breadcrumb":{"@id":"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/#primaryimage","url":"https:\/\/www.method.me\/wp-content\/uploads\/2026\/01\/Lean-Manufacturing-Principles-Method-CRM.jpg","contentUrl":"https:\/\/www.method.me\/wp-content\/uploads\/2026\/01\/Lean-Manufacturing-Principles-Method-CRM.jpg","width":2400,"height":1350,"caption":"ean Manufacturing Principles Method CRM"},{"@type":"BreadcrumbList","@id":"https:\/\/www.method.me\/blog\/lean-manufacturing-principles\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.method.me\/"},{"@type":"ListItem","position":2,"name":"Lean manufacturing principles: A complete guide to waste reduction (2026)"}]},{"@type":"WebSite","@id":"https:\/\/www.method.me\/#website","url":"https:\/\/www.method.me\/","name":"Method","description":"CRM Software for QuickBooks","publisher":{"@id":"https:\/\/www.method.me\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.method.me\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.method.me\/#organization","name":"Method Integration","url":"https:\/\/www.method.me\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.method.me\/#\/schema\/logo\/image\/","url":"https:\/\/www.method.me\/wp-content\/uploads\/2019\/04\/Logo-MethodCRM-darkblue-V2.svg","contentUrl":"https:\/\/www.method.me\/wp-content\/uploads\/2019\/04\/Logo-MethodCRM-darkblue-V2.svg","width":300,"height":80,"caption":"Method Integration"},"image":{"@id":"https:\/\/www.method.me\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/MethodHQ","https:\/\/x.com\/methodcrm","https:\/\/linkedin.com\/company\/method-integration"]},{"@type":"Person","@id":"https:\/\/www.method.me\/#\/schema\/person\/db8d433458169c561651f0ce238f4daa","name":"Benjamin Locke","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.method.me\/wp-content\/uploads\/2026\/06\/avatar_user_71_1780425602-96x96.jpeg","url":"https:\/\/www.method.me\/wp-content\/uploads\/2026\/06\/avatar_user_71_1780425602-96x96.jpeg","contentUrl":"https:\/\/www.method.me\/wp-content\/uploads\/2026\/06\/avatar_user_71_1780425602-96x96.jpeg","caption":"Benjamin Locke"},"description":"Hailing from Denver, Colorado, Benjamin spent 15 years in Asia involved in real estate and global manufacturing and supply chain with a focus on packaging in Europe. He now focuses on writing finance and business-related content to share some of his experiences with a global audience."}]}},"_links":{"self":[{"href":"https:\/\/www.method.me\/wp-json\/wp\/v2\/posts\/39808","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.method.me\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.method.me\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.method.me\/wp-json\/wp\/v2\/users\/71"}],"replies":[{"embeddable":true,"href":"https:\/\/www.method.me\/wp-json\/wp\/v2\/comments?post=39808"}],"version-history":[{"count":1,"href":"https:\/\/www.method.me\/wp-json\/wp\/v2\/posts\/39808\/revisions"}],"predecessor-version":[{"id":41272,"href":"https:\/\/www.method.me\/wp-json\/wp\/v2\/posts\/39808\/revisions\/41272"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.method.me\/wp-json\/wp\/v2\/media\/39819"}],"wp:attachment":[{"href":"https:\/\/www.method.me\/wp-json\/wp\/v2\/media?parent=39808"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.method.me\/wp-json\/wp\/v2\/categories?post=39808"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.method.me\/wp-json\/wp\/v2\/tags?post=39808"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}